Serving the Pueblo area  ·  (719) 467-3181  ·  Open Mon-Sun 7am-7pm
📞 (719) 467-3181 Free Quote

Metal Roofing in Boone, CO · Local Professionals

Pueblo Metal Roofing · Fast response in Boone and the Pueblo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+232Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Boone is a farm town where the plains open up west of Pueblo, and the lots are wide, the skies are huge, and the wind hits your roof like it means it. Most homes and outbuildings here are older farmhouses, barns, and shops with corrugated or ribbed metal panels, plus a few newer places on large lots. If you live off Boone Road or near the school, you know how fast a spring storm can peel back a panel.

We are Pueblo Metal Roofing, based in Pueblo and serving Boone and the surrounding county. We have worked on enough ag buildings and rural homes out this way to know that hail, wind, and sun do a number on exposed fasteners and seams. When you need a repair that holds or a roof that lasts, call us at (719) 467-3181.

Metal Roofing in Boone

Boone sits on the high plains west of Pueblo, where the ground is dry and sandy, the wind comes across open fields, and summer hail is a real threat. Most properties here are farmhouses, barns, shops, and ag buildings, often with corrugated or ribbed panel roofs that have been up for decades. The wide lots and gravel drives usually give us good access, but the trade-off is that there is nothing to block the wind, so fasteners back out, seams separate, and panels get lifted at the edges. We also see a lot of older roofs where the underlayment has failed and leaks show up at the screw lines or around chimneys and vents. Because the soil drains fast but the sun is intense, we pay attention to UV degradation on coatings and washers. Our team knows how to work around livestock, equipment, and outbuildings without getting in your way, and we can match the profile and color of existing panels so a repair does not look like a patch.

We have been serving Boone and the Pueblo area for years, from standing seam on a new build to a quick screw replacement on a barn that is starting to leak. We are fully insured with general liability and workers' compensation, and we pull permits when they are required.

Our services in Boone

How a Job Works in Boone

Step 1: You call us at (719) 467-3181 or send a message, and we set up a free on-site assessment. We look at the roof, the fasteners, the flashing, and the condition of the panels, and we talk through what you are seeing, whether it is a leak in the shop or wind damage on the house. You get a written estimate with options, no pressure.

Step 2: Once you approve, we schedule the work. In Boone, that often means coordinating around weather and wind, since we do not want to be on a metal roof when gusts are high. If your property is in a historic district or under an HOA, we handle the design review and permit paperwork with the local building department. For ag buildings, we work around your schedule and equipment.

Step 3: When the job is done, we clean up every screw, scrap, and piece of old flashing. We walk the roof with you, show you the work, and make sure you know how to spot a problem before it becomes a leak. We leave your place as clean as we found it, or better.

Pricing in Boone depends on the job. For a typical metal roof repair, like fixing a leak or replacing failed fasteners, you are looking at a starting point around $450, and screw replacement and re-fastening starts at $750. If you need a full roof, corrugated and ribbed panel roofing starts at $5.50 per square foot, metal roof installation at $8 per square foot, and standing seam at $10 per square foot. A metal roof over shingles (retrofit) starts at $7 per square foot, and replacement at $9 per square foot. The main factors are the size and pitch of the roof, how many layers are already there, access for trucks and equipment, and how urgent the work is. We give free estimates, so call (719) 467-3181 and we will get you a real number for your property.

My barn off Boone Road has corrugated panels that are backing out screws and leaking at the seams. Can you fix that without replacing the whole roof?
Yes. That is one of the most common calls we get in Boone. We can replace the screws with new ones that have proper washers, re-seat the panels, and seal the seams. If the panels are still sound, a repair is usually the right move. We will inspect the underlayment and flashing too, because leaks often start there. Call us at (719) 467-3181 to set up a free assessment.
A storm just came through and lifted some panels on my house. How fast can you get out to Boone for an emergency repair?
We prioritize storm damage and active leaks. Call (719) 467-3181 and we will get a crew out as soon as we can, usually within a day or two depending on the storm volume. We can tarp or secure the roof to prevent further damage, then give you a full estimate for the repair.
What does a metal roof cost for a typical farmhouse in Boone?
For a corrugated or ribbed panel roof, you are starting around $5.50 per square foot installed. A standing seam roof starts at $10 per square foot. A repair or leak fix starts at $450. The exact price depends on the square footage, the pitch, how many old layers are there, and access. We give free estimates, so you can get a precise number for your place.
Do I need a permit to replace my roof in Boone, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We always check with the local building department before we start, and we can pull the permit for you. If your property is in a historic district or has other design review, we will coordinate that as well. Just call us at (719) 467-3181 and we will walk you through it.
My neighbor's tree limbs hang over my roof and I am worried about liability if they fall. What can I do?
That is a common issue in Boone with the cottonwoods and other big trees. Property line rules generally let you trim branches that overhang your property, but you should check with your neighbor first and make sure you are not damaging their tree. If a limb falls and damages your roof, your insurance may cover it, but we can inspect and repair any damage. We can also install snow guards or heavy-duty panels to reduce risk.
Are you insured for work on my property in Boone?
Yes, we are fully insured with general liability and workers' compensation. That protects you and your property if anything goes wrong on the job.
What should I do to maintain my metal roof in Boone between storms?
Check your roof after big wind or hail, especially the fasteners and seams. Look for loose screws, dented panels, or gaps at flashing. Keep trees trimmed back, and remove debris from valleys and gutters. Every few years, have us inspect the washers and coatings, since the intense sun can degrade them. A quick inspection can catch a small leak before it becomes a big repair.
Why choose us?

Trusted professionals in Pueblo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Pueblo

All your work handled by qualified professionals in Pueblo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

232+ Verified Client Reviews in Pueblo

⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Pueblo · Response within 24h · No commitment · ☎ (719) 467-3181

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Pueblo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm