Serving the Pueblo area  ·  (719) 467-3181  ·  Open Mon-Sun 7am-7pm
📞 (719) 467-3181 Free Quote

Metal Roofing in Pueblo, CO (81003) · Local Professionals

Pueblo Metal Roofing · Fast response in Pueblo and the Pueblo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+232Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Pueblo is a city of brick and steep gables, from the Victorian mansions around Mesa Junction and Rosemount to the steel-mill worker cottages in Bessemer and the low-slung ranches out in Pueblo West. The housing stock here spans more than a century, and the weather tests every roof with intense UV, spring hail, and freeze-thaw cycles that work on fasteners and flashing year after year.

Homeowners in 81003 and across Pueblo County call Pueblo Metal Roofing because we know how these roofs fail. We have seen separated seams on standing seam panels after a windstorm, failed fasteners on corrugated roofs near the Arkansas River, and ice damming at the eaves on homes toward the foothills.

Metal Roofing in Pueblo (81003)

Pueblo sits at about 4,700 feet where the high plains meet the Wet Mountains, and that elevation brings about 300 sunny days a year with intense UV that breaks down sealants and paints. The semi-arid climate means big temperature swings, strong spring and fall winds, and summer hail thunderstorms that can dent or loosen panels. On the older brick homes in Bessemer and the Northside, roof pitches are often steep and access is tight, so we plan staging carefully to protect landscaping and neighboring properties. In Pueblo West, the large lots and open exposure mean wind uplift is a real concern, and we specify fasteners and panel profiles accordingly. The dry sandy soil and cottonwoods along the river are local details, but the real challenge is the freeze-thaw cycle that can open flashing gaps and cause ice damming on homes at higher elevations toward Rye and Beulah.

Our team has worked on everything from Italianate mansions near the Historic Arkansas Riverwalk to farm shops out toward Boone. We understand the local building stock and the specific ways metal roofs perform here, and we bring that experience to every estimate.

Our services in Pueblo

How a Job Works in Pueblo

Step 1: You call us at (719) 467-3181 or request a free estimate online. We schedule an on-site assessment, and we will walk the roof with you, check the attic if accessible, and document any damage with photos. We will explain what we find and give you a written estimate before any work begins.

Step 2: Once you approve, we pull the required permits through the City of Pueblo and coordinate with any HOA or historic district review if your home is in a designated area. Our crews are experienced with tight access in older neighborhoods like Mesa Junction, and we take care to protect your landscaping and keep the site secure. We order materials and schedule the work, typically completing most residential roofs in a few days depending on weather and complexity.

Step 3: After installation, we do a thorough cleanup, including magnetic sweeps for nails, and we walk the finished roof with you to make sure you are satisfied. We leave your property clean and provide a final inspection checklist.

Pricing for metal roofing in Pueblo depends on the size and pitch of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that code limits the number of layers you can recover. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a free estimate tailored to your home, call us at (719) 467-3181.

My 1920s bungalow in Bessemer has a steep, complex roof with multiple gables. Can you install standing seam without damaging the original brick?
Yes, we work on older homes like those in Bessemer regularly. We use careful staging and protect the brick and landscaping. For steep pitches, we use specialized equipment and fall protection. We will assess the roof structure to ensure it can support the new metal roof and recommend the best approach, whether that is a full tear-off or a retrofit, while respecting the home's character.
A windstorm just lifted some panels on my roof in Pueblo West. How quickly can you respond for emergency repairs?
We prioritize storm damage calls and aim to respond within 24 to 48 hours for emergencies. Call us at (719) 467-3181 and we will schedule an inspection as soon as possible. We can often make temporary repairs to prevent further damage and then provide a full estimate for permanent fixes.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch home in Belmont?
For a 1,500-square-foot ranch with a low-pitch roof, a metal roof replacement typically ranges from $13,500 to $18,000, depending on the material and any necessary decking repairs. Standing seam would be at the higher end. We provide a detailed estimate after inspecting your roof, so you know exactly what to expect.
Do I need a permit to replace my roof in Pueblo, and how do I find out about historic district rules?
Yes, roofing permits are generally required for replacements in Pueblo. The rules vary by jurisdiction, so it is best to check with the City of Pueblo directly. You can visit the City of Pueblo website for contact information and to verify current requirements. If your home is in a historic district, there may be additional design review, and we can help guide you through that process.
My HOA in Pueblo West has strict design guidelines. Can you help with approval for a metal roof?
Absolutely. We are familiar with HOA requirements in Pueblo West and can provide material samples, color chips, and specifications to submit for approval. We recommend getting HOA approval before signing a contract, and we can coordinate with your HOA board if needed.
Are you fully insured for roofing work in Pueblo, including workers' compensation?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Pueblo's climate to prevent leaks and extend its life?
In Pueblo's intense UV and hail environment, we recommend annual inspections, especially after storm season. Check for loose fasteners, damaged sealant, and debris buildup in valleys and gutters. We offer maintenance plans that include tightening fasteners, replacing worn screws, and applying protective coatings to extend the life of your roof.
Why choose us?

Trusted professionals in Pueblo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Pueblo

All your work handled by qualified professionals in Pueblo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

232+ Verified Client Reviews in Pueblo

⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Pueblo · Response within 24h · No commitment · ☎ (719) 467-3181

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Pueblo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm